According to production and processing methods can be divided into the following categories:
①Hot-dip galvanized steel sheet. Thin steel plate will be immersed in the zinc melting tank to the surface adhesion of the thin layer of zinc plate. Zinc is mainly used for the production process, that is, to roll into a row of steel immersed in melting tanks are made of zinc-plated galvanized steel sheet;
② Alloyed galvanized steel sheet. This plate is manufactured by hot dip method, but in a slot immediately after it is heated to about 500 ℃ to generate zinc and iron alloy coated. This Galvanized coatings have good adhesion and weldability;
③Electro-galvanized steel sheet . Plating method used to create such a galvanized steel sheet has excellent workability. However, thinner coatings, corrosion resistance than hot dip galvanized plate method;

④ Poor single-sided double-plated and galvanized steel sheet. Single-sided galvanized steel sheet, that is only in the side of galvanized products. In the welding, coating, rust-proof handling, processing, etc., than the two-sided galvanized sheet with better adaptability. Not coated on one side to overcome the shortcomings of zinc as well as another thin layer of zinc in zinc-plated board, that is, two-sided galvanized plate margin;

⑤ Alloy, galvanized steel composite. It is made of zinc and other metals such as lead, zinc and even made of alloy steel plate into a composite plating. This plate not only has excellent anti-corrosion performance, and good performance of the coating.

In addition to the above five, there are color galvanized steel, galvanized steel sheet printing coating, such as galvanized steel sheet laminated PVC. But there is still the most commonly used hot-dip galvanized sheet.

Standard

ASTM A653 CS-Type G90, ISO 3575, GB2518, BE EN 10327, EN 10142, JIS 3302, JIS G3002,  GB/T251B

Steel Grade:

SPCC, SGCC, DX51D+Z,　SGCD, DX52D+Z,　DC53D+Z,　DC54D+Z, Q235, etc. other grade can be available

Zinc Coating

60-705g/m2

Thickness

0.15-3.0mm

Width

260-1250mm

Length

Coil, sheet, according to the requirement of clients

Surface treatment

Zero spangle, skin-passed, anti-fingerprint coated, not oiled; Regular spangle, min spangle etc

Inside　Coil

508mm, 610mm

Weight　of　Coil

2-8　tonne

Main using

General　Using,　Drawing　,　Deep-Drawing,　Electric-Appliance, Home appliances, Constructions, Machineries, Architecture, Light industry, Antomobile, etc; Widely used for roofs, outer walls, ovens, Explosive-proof steel, electrically controlled cabinets, and industrial freezers in the Residential and industrial buildings.

Package

Standard export package: Waterproof material packing inner and out edges protection, pallets suit for containers.