Chopped Strands for Thermoplastic are based on silane coupling agent and special sizing formulation, compatible with PA,PBT/PET, PP, AS/ABS, PC, PPS/PPO,POM, LCP;
E-Glass Chopped Strands for thermoplastic are know for excellent strand integrity, superior flowability and processing property, delivering excellent mechanical property and high surface quality to its finished product.

1. Excellent strand integrity, low static, low fuzz, and good flowability

2. Good bonding with resins, insuring excellent surface appearance

3. Excellent mechanical properties

4. Uniform appearance and low static

5. Super high impact strength

Type of Glass  

E

Wet Chopped Strands

CS

Filament Diameter, μm  

11~13 or others

Chop Length, mm  

4.5 or others

Technical Parameters

   Filament Diameter  (%)  

Moisture Content (%)  

Size Content (%)  

Chop length (mm)

      ISO 1888  

ISO 3344  

ISO 1887  

Q/JS J0361  

          ±10  

≤0.10

0.5±0.15

 ±1.0

Packaging

The product can be packed in bulk bags, cardboard boxes, wooden crates,    heavy-duty box, octagonal box and composite plastic woven bags;

Storage

Unless otherwise specified, the fiberglass products should be stored in a dry and  cool area.  The room temperature and humidity should be always maintained at  15ć~35ć and 35% ~ 65%̻It is best if the product is used within 12 months after production date.The fiberglass products should remain in their original packaging  until just prior to user . To ensure safety and avoid damage to the product, the pallets  should not be stacked more than two layers high. When the pallets are stacked in 2  layers, special care should be taken to correctly and smoothly move the top pallet.  heavy-duty box.